Plunger and Piston
IMS: International Marketing Services
The plunger and piston pumps of our production are, in particular, used in metalurgy for presses drive and for descaling units, in oil exploitation, chemical industry and in underground mines. The pumped liquid is chiefly water-oil emulsions, water, hydraulic oil, petroleum, ammonia, carbamate and other liquids, characteristics of which are to be consulted with the manufacturer. The pumps can be supplied as bare end shaft pumps or complete with drive. The pumps as well as pumping sets can be also supplied for environment with explosion hazard. Lower minimum pressure of plunger and piston pumps than stated is possible!
| Type of pump | Flow rate (max.) |
Pressure Head (max.) |
Output (max.) |
Temperature of liquid |
Category | Branch | |
| LPV | 1770.00 l/min |
78.00 bar |
126.00 kW |
80 °C | plunger and piston | exploitation, other | |
| PAB-3-100 | 1412.00 l/min |
120.00 bar |
191.00 kW |
50 °C | plunger and piston | mechanical eng. | |
| PAD | 548.00 l/min |
1000.00 bar |
105.00 kW |
50 °C | plunger and piston | mechanical eng., exploitation, other | |
| PAH | 7081.00 l/min |
400.00 bar |
1475.00 kW |
80 °C | plunger and piston | mechanical eng., exploitation, other | |
| PAR | 655.00 l/min |
800.00 bar |
115.00 kW |
60 °C | plunger and piston | mechanical eng., exploitation | |
| PAS | 420.00 l/min |
500.00 bar |
175.00 kW |
50 °C | plunger and piston | power eng., mechanical eng. | |
| PAX-3-100 | 358.00 l/min |
1250.00 bar |
197.00 kW |
50 °C | plunger and piston | mechanical eng., other | |
| PAX-3-160 | 1715.00 l/min |
1050.00 bar |
400.00 kW |
50 °C | plunger and piston | mechanical eng., other | |
| PAX-3-30 | 54.00 l/min |
250.00 bar |
17.00 kW |
50 °C | plunger and piston | water m. | |
| PAX-3-40 | 46.00 l/min |
1000.00 bar |
41.00 kW |
50 °C | plunger and piston | water m. | |
| PAX-3-60 | 182.00 l/min |
1200.00 bar |
110.00 kW |
50 °C | plunger and piston | mechanical eng., other | |
| PCD | 395.50 l/min |
400.00 bar |
113.00 kW |
120 °C | plunger and piston | chemistry, exploitation | |
| PCR | 218.00 l/min |
200.00 bar |
58.00 kW |
80 °C | plunger and piston | chemistry, exploitation | |
| PCX | 3206.00 l/min |
400.00 bar |
668.00 kW |
120 °C | plunger and piston | chemistry | |
| PVA | 232.60 l/min |
100.00 bar |
23.30 kW |
50 °C | plunger and piston | water m. | |
To find out more information about these product lines as well as product availability, please submit an inquiry.
Design